CONTRACTOR PILING WITH DMC DIRECT MUD CIRCULATION METHOD IN INDIA

Methodology for cast in situ bored piles (Rotary Method)
• Shifting of the hydraulic auger to the required pile and center to be done accurately with the help of plumb bob.
• Auger to start the boring & bottom casing to follow next
• The center & the alignment of the bottom casing to be scrutinized accordingly with the reference points marked at the right angle.
• The bore to be drilled and developed by the auger.
• Bentonite slurry to be used if required in case of retaining walls of the bore.
• The indigenously designed auger that performs on any surface including rock to be used in developing the bore.
• Hard surfaced conical teeth made of tungsten carbide are present in auger. Such a mechanism can develop the bore in rock also.
• The bucket shall be withdrawn from the hole and on opening bottom of hinge, the admitted muck will be discharged on ground.
• On achieving the desire strata, a series of events to follow, viz. the steel cage to be lowered followed by lowering of tremie.
• The concreting operation to be carried out as outlined in IS2911 sec.
Dia :
450 to 2500 MM
Type of Pile :
1. Driven pile foundations, 2. Cast-in-situ pile foundations 3. Combined pile foundations, 4 End-bearing piles, 5 Screwed piles, 6 Steel piles, 7 Concrete piles, 8 Stone Column (Aggregate piles)
Piling Machine We Use :
hydraulic MAIT Machine, DMC Tripod Conventional Method direct mud circulation, Tyre mounted rig machine( Tractor, Truck), Manual Auger Machine,
Expertise :
Piling in Rock, Piling with liner,Piling in sand Gravels, Piling in River, Offshore piles
PRICE :
Rs Negotiable
CONTACT NO FOR PILING SERVICES :
Call/ Whats up-+91 74892 84608 /+91 62327 26290
email ID:
[email protected]
Address:

Registered Office:
Tiara Infrastructure Pvt Limited Address: Saikripa square, Tiara House 782, Service Road, Yojna, Scheme No 171, Indore, Madhya Pradesh 452010